Method and sources
Cogpull answers one question: will these drivetrain parts work together? A wrong “yes” costs a rider a part, so every answer carries its source, and where no source settles a question the checker says “not documented” instead of guessing.
Where the data comes from
Shimano. Pairings come from SHIMANO Compatibility 2026–2027: each box on its rear-drivetrain charts (shifters joined by a bar to derailleurs) is one family in our data, and a shifter and derailleur that share a box are a listed pair. Sprocket limits, capacity, front difference and chain come from the newest SHIMANO Specifications book that lists the part, back to the 2014–2015 edition for discontinued parts. Where the spec sheet and the chart give different limits (some 10-speed road derailleurs), the checker passes up to the lower figure and cautions up to the higher one. Cassette-to-hub fit follows Shimano’s FREEHUB charts C-731 and C-649.
SRAM. Each part’s speed, actuation standard, largest and smallest cog and driver body come from its SRAM model page; pairings from those pages and SRAM’s compatibility maps. SRAM publishes no total-capacity figure, so the capacity check reports SRAM derailleurs as not documented. Where SRAM lists two largest-cog figures for one model without saying which cage each belongs to, the checker cautions between them.
microSHIFT. microSHIFT states on each model page which shifters and derailleurs a part works with, including its Shimano-compatible lines. Those statements are its families.
Across brands. No maker documents mixing with another maker’s parts (microSHIFT aside). For those pairs the checker uses, in order: a statement in a mechanic’s reference (BikeGremlin’s rear-derailleur compatibility article, Wikibooks’ gear-changing dimensions), then arithmetic from published derailleur ratios: if a derailleur moves more or less per millimetre of cable than the shifter expects, the error adds up with each click, and once it reaches a third of a cog across the cassette the pair is marked as not working. Converters are listed only for the conversions their makers state.
Coverage
| Brand | Shifters | Derailleurs | Cassette sizes | Chains | Maker families |
|---|---|---|---|---|---|
| Shimano | 171 | 104 | 137 | 25 | 22 |
| SRAM | 44 | 46 | 45 | 40 | 7 |
| microSHIFT | 14 | 9 | 3 | 0 | 11 |
Cable-operated (mechanical) drivetrains, 7- to 12-speed. Not covered: Shimano Di2 and SRAM AXS electronic shifting (they pair only within their own systems), Campagnolo, internal-gear hubs and front derailleurs.
Sources
- SHIMANO Compatibility 2026–2027 (Ver 2.8), Shimano (maker document, 2026-11-06)
- SHIMANO Specifications 2026–2027 (Ver. 2.9), Shimano (maker document, 2026-11-06)
- SHIMANO Specifications 2025–2026, Shimano (maker document, 2025)
- SHIMANO Specifications 2023–2024, Shimano (maker document, 2023)
- SHIMANO Specifications 2021–2022, Shimano (maker document, 2021)
- SHIMANO Specifications 2019–2020, Shimano (maker document, 2019)
- SHIMANO Specifications 2017–2018, Shimano (maker document, 2017)
- SHIMANO Specifications 2014–2015, Shimano (maker document, 2014)
- SRAM model specifications, SRAM (maker document, 2026-11-19)
- SRAM 2021 MTB Components Compatibility Map (Rev A), SRAM (maker document, 2020)
- SRAM 2024+ Road Components Compatibility Map, SRAM (maker document, 2024)
- SRAM AXS Component Compatibility Map, SRAM (maker document, 2026-11-19)
- SRAM XD and XDR driver body explained, SRAM (maker document, 2026-11-19)
- Eagle Transmission, SRAM (maker document, 2026-11-19)
- microSHIFT model specifications, microSHIFT (maker document, 2026-11-19)
- ShiftMate cable-pull adapters, Jtek Engineering (maker document, 2026-11-19)
- Tanpan (cable pull converter), Wolf Tooth Components (maker document, 2026-11-19)
- Bicycles/Maintenance and Repair/Gear-changing Dimensions, Wikibooks (third-party, 2026-11-19)
- Derailleur and Shifter Data Analysis (measured cable pull and pull ratio), drivetrainbuilder.com (third-party, 2026-11-19)
- Compatibility [04] Rear derailleurs, BikeGremlin (third-party, 2026-02-02)
Maker data is re-checked every January and when a new groupset launches. Changes are logged on the changelog. Brand and model names identify parts; Cogpull is not affiliated with Shimano, SRAM, microSHIFT, Jtek or Wolf Tooth.