Freehub bodies: HG, Micro Spline, XD, XDR, L2
The freehub body is the part of the rear hub the cassette slides onto. Get it wrong and the cassette will not fit at all, or fits only with a spacer. These are the fits Shimano and SRAM document.
The fit table
Rows are cassettes, columns are hub bodies. Hover or tap a cell for the maker’s wording.
| Cassette | HG 8/9/10-speed and MTB 11-speed (Shimano HG spline M) | HG road 11/12-speed (Shimano HG spline L, SRAM 11-speed driver) | Shimano road 12-speed (HG spline L2) | Shimano MICRO SPLINE | SRAM XD | SRAM XDR |
|---|---|---|---|---|---|---|
| HG 8/9/10-speed, MTB 11-speed, CS-HG700/HG800/RS400 11-speed, SRAM PG (8–12-speed HG) | ✓ | ✓ spacer | ✕ | ✕ | ✕ | ✕ |
| Shimano road 10-speed CS-6700/5700 (and 7900, 7800, 6600, 5600) | ✓ spacer | ✓ spacer | ✕ | ✕ | ✕ | ✕ |
| Road 11-speed (Shimano CS-R7000, R8000, 5800…; SRAM PG-1170) | ✕ | ✓ | ✕ | ✕ | ✕ | ✕ |
| Shimano road 12-speed | ✕ | ✓ | ✓ | ✕ | ✕ | ✕ |
| Shimano MTB 12-speed (Micro Spline) | ✕ | ✕ | ✕ | ✓ | ✕ | ✕ |
| Shimano LINKGLIDE 9- and 10-speed | ✓ | ✓ spacer | ✕ | ✕ | ✕ | ✕ |
| Shimano LINKGLIDE 11-speed (11-45, 11-50) | ! | ! | ✕ | ✕ | ✕ | ✕ |
| SRAM XD (XG cassettes with 10T) | ✕ | ✕ | ✕ | ✕ | ✓ | ✓ spacer |
| SRAM XDR (road 12-speed XG) | ✕ | ✕ | ✕ | ✕ | ✕ | ✓ |
The spacers
- 1.85 mm: an HG L (11/12-speed road) body is 1.85 mm longer than HG M, so 8/9/10-speed and mountain 11-speed cassettes need a 1.85 mm spacer behind them on it (Shimano C-731; SRAM says the same for its 11-speed driver). An SRAM XD cassette on an XDR driver also takes a 1.85 mm spacer.
- 1.0 mm: Shimano’s older road 10-speed cassettes (CS-7900, 7800, 6700, 6600, 5700, 5600) come with a 1.0 mm spacer for an HG M body.
LINKGLIDE and Micro Spline
Shimano: LINKGLIDE cassettes are not compatible with Micro Spline. They fit HG bodies, but for the 11-50 LINKGLIDE cassette Shimano lists hubs where it can interfere with the derailleur and spokes (C-649).
Worked examples
Shimano 105 RD-R7000-GS + Shimano 105 CS-R7000 11-30T
✕ Won’t work
- ✓Cog spacing: The cassette has the 11-speed spacing this drivetrain indexes (3.74 mm between cogs). Wikibooks, Gear-changing Dimensions (Table 1)
- ✓Largest cog: 30T is within this derailleur’s 34T limit. Shimano Specifications 2026-2027, p. 124
- ✓Smallest cog: 11T suits this derailleur (11T minimum). Shimano Specifications 2026-2027, p. 124
- ✕Freehub body: Road 11-speed cassettes are too wide for an 8/9/10-speed (HG spline M) body; only CS-HG800, CS-HG700 and CS-RS400 fit it. Shimano Compatibility 2026–27, p. 85 (C-731)
Fixes
- This cassette needs a HG road 11/12-speed (Shimano HG spline L, SRAM 11-speed driver) freehub body.
- Or a cassette that fits your freehub body:
Shimano Deore RD-M6100-SGS + Shimano Deore CS-M6100-12 10-51T
✓ Works
- ✓Cog spacing: The cassette has the Shimano 12-speed spacing this drivetrain indexes (3.55 mm between cogs). Wikibooks, Gear-changing Dimensions (Table 1)
- ✓Largest cog: 51T is within this derailleur’s 51T limit. Shimano Specifications 2026-2027, p. 27
- ✓Smallest cog: 10T suits this derailleur (10T minimum). Shimano Specifications 2026-2027, p. 27
- ✓Freehub body: Fits directly. Shimano Compatibility 2026–27, p. 85 (C-731)
SRAM GX Eagle RD-GX-1-B2 + SRAM XG-1295 Eagle XG-1295 10-52T
✓ Works
- ✓Cog spacing: The cassette has the SRAM Eagle 12-speed spacing this drivetrain indexes (3.65 mm between cogs). Wikibooks, Gear-changing Dimensions (Table 1)
- ✓Largest cog: 52T is within this derailleur’s 52T limit. SRAM RD-GX-1-B2
- ✓Freehub body: Fits with a 1.85 mm spacer behind the cassette (SRAM). SRAM, SRAM XD and XDR driver body explained; SRAM, SRAM 2021 MTB Components Compatibility Map (Rev A), p. 2
Check your own parts in the checker; every pull standard and figure is on the cable pull chart.