Mixing Shimano and SRAM
Short answer: Shimano and SRAM cassettes and chains interchange at 8, 9, 10 and 11 speeds, because the cog spacing is the same. Shifters and rear derailleurs mostly do not, because the two makers use different cable-pull ratios. At 12-speed even the cassettes part ways.
Shifters with derailleurs
A shifter pulls a set length of cable per click and a derailleur moves a set distance per millimetre of cable; the two have to agree. Shimano’s road and mountain standards and SRAM’s 1:1, Exact Actuation, X-Actuation and Eagle standards all differ. The table runs every pairing of the main Shimano and SRAM standards through the same rules as the checker, at 11-speed.
| SRAM 1:1 (ESP) 7-, 8- and 9-speed derailleur | SRAM Exact Actuation (road 10/11-speed, MTB 10-speed) derailleur | SRAM X-Actuation 11-speed (MTB) derailleur | SRAM Eagle 12-speed (mechanical, X-Actuation) derailleur | |
|---|---|---|---|---|
| Shimano 2:1 (6- to 9-speed, and road 10-speed before Tiagra 4700) shifter | ✕ Won’t work | ✕ Won’t work | ✕ Won’t work | ✕ Won’t work |
| Shimano road 11-speed (also Tiagra 4700 and GRX RX400 10-speed) shifter | ✕ Won’t work | ✕ Won’t work | ✕ Won’t work | ✕ Won’t work |
| Shimano MTB 10- and 11-speed (Dyna-Sys) shifter | ✕ Won’t work | ✕ Won’t work | ! Works, with a catch | ✕ Won’t work |
| Shimano MTB 12-speed (HYPERGLIDE+) shifter | ? Not documented | ? Not documented | ? Not documented | ? Not documented |
The SRAM-to-Shimano direction is the same picture. The one historical exception is a family of older SRAM derailleurs built for Shimano’s 2:1 pull; BikeGremlin notes they work with Shimano 6- to 9-speed and old road 10-speed shifters, but they are rare now.
Cassettes and chains
Wikibooks’ measurements put Shimano and SRAM cogs at the same spacing from 8- to 10-speed (4.8, 4.35 and 3.95 mm) and within 0.02 mm at 11-speed. So a SRAM PG-1170 cassette works on a Shimano 11-speed road drivetrain, and a Shimano 11-speed chain on a SRAM one, as long as the freehub body fits. At 12-speed Shimano’s cogs are 3.55 mm apart and SRAM Eagle’s 3.65 mm: about a third of a cog over the cassette, and SRAM states Eagle chains are only compatible with SRAM Eagle systems.
Freehub bodies
SRAM’s XD and XDR drivers take only SRAM-standard cassettes (and microSHIFT’s XD ones); Shimano’s Micro Spline takes only Shimano 12-speed mountain cassettes. The HG body is the common ground: Shimano and SRAM HG cassettes from 8- to 10-speed, mountain 11-speed and SRAM’s PG-1230 12-speed all fit it. See freehub bodies.
Converters
Two Jtek ShiftMates bridge the brands: ShiftMate 4 for Shimano and SRAM road 11-speed in either direction, and ShiftMate 6 for Shimano 2:1 shifters with SRAM 1:1 derailleurs.
| Converter | Shifter | Derailleur | Cassette speeds | Notes and source |
|---|---|---|---|---|
| Wolf Tooth Tanpan 11 | Shimano road 11-speed (also Tiagra 4700 and GRX RX400 10-speed) | Shimano MTB 10- and 11-speed (Dyna-Sys) | 11 | Shimano 11-speed road shifter with an 11-speed Shimano mountain derailleur. Wolf Tooth Components, Tanpan (cable pull converter) |
| Wolf Tooth Tanpan 11 | Shimano road 11-speed (also Tiagra 4700 and GRX RX400 10-speed) | Shimano MTB 10- and 11-speed (Dyna-Sys) | 10 | Tiagra 4700 or GRX RX400 10-speed shifter with an 11-speed Shimano mountain derailleur and a 10-speed cassette. Wolf Tooth Components, Tanpan (cable pull converter) |
| Wolf Tooth Tanpan 10 | Shimano 2:1 (6- to 9-speed, and road 10-speed before Tiagra 4700) | Shimano MTB 10- and 11-speed (Dyna-Sys) | 10 | Shimano 10-speed road shifter (not Tiagra 4700) with a 10-speed Shimano mountain derailleur. Wolf Tooth Components, Tanpan (cable pull converter) |
| Jtek ShiftMate 8 | Shimano road 11-speed (also Tiagra 4700 and GRX RX400 10-speed) | Shimano MTB 10- and 11-speed (Dyna-Sys) | 11 | Jtek ShiftMate 8 |
| Jtek ShiftMate 8 | Shimano MTB 10- and 11-speed (Dyna-Sys) | Shimano road 11-speed (also Tiagra 4700 and GRX RX400 10-speed) | 11 | Jtek ShiftMate 8 |
| Jtek ShiftMate 6 | Shimano 2:1 (6- to 9-speed, and road 10-speed before Tiagra 4700) | SRAM 1:1 (ESP) 7-, 8- and 9-speed | 9, 10 | Jtek ShiftMate 6 |
| Jtek ShiftMate 6 | SRAM 1:1 (ESP) 7-, 8- and 9-speed | Shimano 2:1 (6- to 9-speed, and road 10-speed before Tiagra 4700) | 9 | Jtek ShiftMate 6 |
| Jtek ShiftMate 6 | Shimano 2:1 (6- to 9-speed, and road 10-speed before Tiagra 4700) | Shimano MTB 10- and 11-speed (Dyna-Sys) | 8, 9, 10 | Jtek ShiftMate 6 |
| Jtek ShiftMate 6 | Shimano MTB 10- and 11-speed (Dyna-Sys) | Shimano 2:1 (6- to 9-speed, and road 10-speed before Tiagra 4700) | 10 | Jtek ShiftMate 6 |
| Jtek ShiftMate 4 | Shimano road 11-speed (also Tiagra 4700 and GRX RX400 10-speed) | SRAM Exact Actuation (road 10/11-speed, MTB 10-speed) | 10, 11 | Jtek ShiftMate 4 |
| Jtek ShiftMate 4 | SRAM Exact Actuation (road 10/11-speed, MTB 10-speed) | Shimano road 11-speed (also Tiagra 4700 and GRX RX400 10-speed) | 11 | Jtek ShiftMate 4 |
| Jtek ShiftMate 9 | SRAM Exact Actuation (road 10/11-speed, MTB 10-speed) | SRAM X-Actuation 11-speed (MTB) | 11 | SRAM 11-speed road shifter with an SRAM 11-speed mountain derailleur (one way only). Jtek ShiftMate 9 |
Worked examples
Shimano 105 ST-R7000 + SRAM Rival 22 RD-RIV-B1 + Shimano 105 CS-R7000 11-28T
✕ Won’t work
- ✕Shifter and derailleur: Different pull standards: the shifter is Shimano road 11-speed (also Tiagra 4700 and GRX RX400 10-speed) (derailleur ratio 1.4), the derailleur is SRAM Exact Actuation (road 10/11-speed, MTB 10-speed) (ratio 1.3). Each click moves the derailleur 7% too little, which adds up to 0.7 cogs across 11 speeds. It will not index across the cassette. Wikibooks, Gear-changing Dimensions (Tables 2 and 3); BikeGremlin, Rear derailleur compatibility
- ✓Speeds: The shifter has 11 positions for the cassette’s 11 cogs. BikeGremlin, Rear derailleur compatibility
- ✓Cog spacing: The cassette has the 11-speed spacing this drivetrain indexes (3.74 mm between cogs). Wikibooks, Gear-changing Dimensions (Table 1)
- ✓Largest cog: 28T is within this derailleur’s 28–32T limit. SRAM RD-RIV-B1
Fixes
- A Jtek ShiftMate 4 converts the cable pull for this pair. Jtek ShiftMate 4
- Derailleurs listed with your shifter that take a 28T cog:
- Drop-bar shifters listed with your derailleur:
SRAM Rival 22 SB-RIV-B1 + SRAM Rival 22 RD-RIV-B1 + Shimano 105 CS-R7000 11-28T
! Works, with a catch
- ✓Shifter and derailleur: SRAM rates both parts 11-speed Exact Actuation on their model pages. SRAM SB-RIV-B1; SRAM RD-RIV-B1; SRAM, SRAM 2024+ Road Components Compatibility Map
- ✓Speeds: The shifter has 11 positions for the cassette’s 11 cogs. BikeGremlin, Rear derailleur compatibility
- ✓Cog spacing: The cassette has the 11-speed spacing this drivetrain indexes (3.74 mm between cogs). Wikibooks, Gear-changing Dimensions (Table 1)
- ✓Largest cog: 28T is within this derailleur’s 28–32T limit. SRAM RD-RIV-B1
- ?Capacity: This setup needs 33T of capacity; SRAM does not publish a total-capacity figure for this derailleur. SRAM RD-RIV-B1
- ✓Chain: A 11-speed chain is what this cassette takes. Shimano Specifications 2026-2027, p. 138
- ✓Freehub body: Fits directly. Shimano Compatibility 2026–27, p. 85 (C-731)
Shimano Deore XT SL-M8100-R + Shimano Deore XT RD-M8100-SGS + SRAM XG-1295 Eagle XG-1295 10-52T
✕ Won’t work
- ✓Shifter and derailleur: Shimano lists this shifter with this derailleur (Shimano MTB 12-speed). Shimano Compatibility 2026–27, p. 13 (C-558)
- ✓Speeds: The shifter has 12 positions for the cassette’s 12 cogs. BikeGremlin, Rear derailleur compatibility
- !Cog spacing: The drivetrain indexes Shimano 12-speed cogs (3.55 mm apart); this cassette’s cogs are 3.65 mm apart. Over 11 shifts that is 1.1 mm, about 0.3 of a cog. Neither maker lists the mix; expect a compromise at one end of the cassette. Wikibooks, Gear-changing Dimensions (Table 1)
- ✕Largest cog: 52T is over this derailleur’s 51T maximum. Shimano Specifications 2026-2027, p. 26
- ✓Smallest cog: 10T suits this derailleur (10T minimum). Shimano Specifications 2026-2027, p. 26
- ✓Freehub body: Fits directly. SRAM, SRAM XD and XDR driver body explained
Fixes
- Cassettes this derailleur takes (largest cog 51T or less):
Check your own parts in the checker; every pull standard and figure is on the cable pull chart.